存檔用。檢查手把吧
參考來源:"建議將手把RESET(後面有小按鈕) 然後用USB接在主機上,再按PS紐 神奇的事發生了!!會震動了!!果然是震動搖桿!!不是死魚搖桿"
- 請問太空戰士13,手把的震動要在哪裡調整?? - Mobile01 討論群組 (在「Google 網頁註解」中檢視)
存檔用。檢查手把吧
參考來源:"建議將手把RESET(後面有小按鈕) 然後用USB接在主機上,再按PS紐 神奇的事發生了!!會震動了!!果然是震動搖桿!!不是死魚搖桿"
- 請問太空戰士13,手把的震動要在哪裡調整?? - Mobile01 討論群組 (在「Google 網頁註解」中檢視)
1. systeminfo | find /i "install date"
2. ([WMI]'').ConvertToDateTime((
"([WMI]'').ConvertToDateTime((Get-WmiObject Win32_OperatingSystem).InstallDate)"
- Determine a Windows Server build date with these one-liners | Servers and Storage | TechRepublic.com (在「Google 網頁註解」中檢視)
原來一個 netsh dhcp server export/import 就搞定了
參考來源:"Migrating DHCP from Windows Server 2003 to Windows Server 2008 Migrating DHCP from Windows Server 2003 to Windows Server 2008 is easier than migrating from earlier versions of Windows. This procedure assumes that the existing DHCP server is running on Windows Server 2003 and that you’ve already installed the DHCP server role on your Windows Server 2008 server. (Note: IPv6 DHCP capability is not discussed in this column.) Follow these steps: Start a command prompt on the Windows Server 2003 DHCP server.- Migrating DHCP from Windows 2000 Server/Windows Server 2003 to Windows Server 2008 | Servers and Storage | TechRepublic.com (在「Google 網頁註解」中檢視)
- At the prompt, type netsh dhcp server export C:\w2k3-dhcp.txt all.
- Copy w2k3-dhcp.txt to the root of the C: volume on your new server.
- On the new Windows Server 2008 DHCP server, start a command prompt. At the prompt, type netsh dhcp server import c:\dhcpdatabase.txt all.
- Start the DHCP administrative console and verify that your scopes and configurations made their way to your new server."
唉,當時刻意在 vm 裡面測試這個。結果, windows 7 裡面的 firewall, defender 全部都沒有警告。當然,慢吞吞的 Trend 也比別人慢了幾天才出解藥。這次故事告訴我,
"Purpose of this file:
Svchst.exe is a program file which most likely was installed by you. Verify the exact disk location shown below. Be aware that this program name has been reported as spyware or adware related, and is something I would surely remove if this was on my computer. Note that the name is very close to a popular system name, svchst.exe is close to svchost.exe and this is often a red flag. You should remove this from your startup immediately. Note that removing it from startup will mean that it isn't running, so you cannot hurt anything as you could always add it back again if it was spyware. You should reboot immediately after removing it from startup, then verify it is not running in your startup list after reboot.
Visit svchst.exe for complete information on this task or process.
If you would like help on other tasks or processes, you can view the entire process and task directory here."
- What is svchst.exe? - svchst explanation. (在「Google 網頁註解」中檢視)